range of float valves offering both fixed arm
and armless options, covers the full range of
float valve requirements.
From the simple
piston and washer valve to the full-flow
diaphragm activated design the Apex float valves
share similar attributes - namely robust
construction, proven 30 years reliability and
full back-up service.
220P Plastic High / Low Valve
Due to the compact nature of the valve this is ideally suited to troughs with confined inlet compartments. this
valve has the added advantage of a barbed outlet for connection to a hose or silencer tube.
Working pressure Low Pressure 0 - 500 kPa [0 - 70psi]
High Pressure 0 - 1400 kPa [0 - 200psi]
Length 295mm overall including the float
Minimum temperature: 1°C.
Maximum temperature: 60°C.
Inserted seat to cover different inlet pressures.
Supplied with high pressure seat fitted (up to 1400 kPa [200psi] working pressure).
With seat removed, the valve is suitable for low to medium pressure (up to 500 kPa [70psi] working pressure).
Tools for seat removal clipped to brass arm.
Pivot webbed for extra strength.
Barbed outlet to allow addition of hose/silencer tube.
½", ¾" and 1" long tail sizes.
A cap is available for the end of the valve (if required).
Acetyl construction - non corrosive materials.
Compact Trough Valve ideally suited to small drinkers or small tanks where space is restricted.
Pump fed large storage tanks and/or reservoirs - It allows for a single level or variable minimum and maximum water levels within a reservoir/tank.
Gravity fed large storage tanks and/or reservoirs - It allows for a single level or variable minimum and maximum water levels within a reservoir/tank
Rain Harvesting - as a back up water supply control valve, providing a backup supply of water in the event of demand exceeding rainfall.
Extremely high volume water inlet control device.
Variable adjustment between minimum and maximum water levels.
Saves electricity by reducing pump run time and at same time increases pump life.
Can be adjusted for use as a top up Rain Harvesting valve (by locating both weights close together)
Long tail for installation into thin wall tanks.
Diaphragm activated - Full Flow Valve
Soft closing action - eliminates water hammer.
Patented self cleaning mechanism to minimise blockages
A high flow rate valve for controlling water flow into large tanks. Note: For pump fed reservoir/tanks use BigBoy or Pump Buddy valves.
Dual Level Valve (for pump applications)
A high flow rate valve for controlling water flow into large tanks. Designed to reduce pump run time.
Visi-Ball® Water Level Indicator
Water level indicator for water tanks.
Easily adjusted using the patented Uni-Ball Joint.
Uni-Ball adjusts to any water tank roof angle.
Suitable for all tanks
Manufactured from UV resistant premium quality materials
Spare extensions/tubes available (1 Metre)
Apex Valves Video